Professional Sign Installation in NYC & NJ

A great sign needs great installation. Improper mounting can damage your building, create safety hazards, void warranties, and result in code violations. Our licensed installation crew ensures your sign is securely mounted, properly wired, and fully compliant with NYC DOB and NJ building codes.

We install signs we fabricate and signs from other providers. Whether it’s a small blade sign or a 40-foot pylon, our team has the equipment, expertise, and licensing to get it up safely and correctly.

Request Installation Quote

Tell us about your sign — we respond within 24 hours.

8,000+

Signs Installed

35+

Years of Experience

All

Sign Types

100%

Licensed & Insured

Your Sign Is Only as Good as Its Installation

Even the best-fabricated sign can fail prematurely if installed incorrectly. Improper mounting creates structural stress, poor electrical connections lead to early component failure, and inadequate weatherproofing allows moisture into places it shouldn’t be.

In NYC, sign installation requires specific DOB compliance. Signs must be installed by or under the supervision of a licensed sign hanger, and certain sign types require permits and inspections. Installing without proper credentials can result in violations, fines, and mandatory removal.

Our installation team handles all of this. Every job includes proper structural assessment, secure mounting, code-compliant electrical connections, weatherproofing, and — when required — permit coordination and post-installation inspection scheduling.

We Install Signs From Any Source

Your Sign or Ours -- We Install It Right

Zoning Consultation

Before you invest in a new sign, we can help evaluate what's likely to be allowed at your specific location — size limits, illumination rules, projection restrictions, and any special district regulations.

Application Assistance

For select projects, we can assist with preparing DOB application packages — drawings, specifications, and supporting documents. We guide you through the process, but approval timelines and outcomes vary significantly by case.

Violation Guidance

Received a DOB or ECB sign violation? We can assess the situation, explain your options, and — on cases we take on — help coordinate corrective action. However, violation resolution depends on the specific circumstances and agency decisions.

NJ Municipal Permits

New Jersey sign regulations vary by municipality. On select projects, we can assist with NJ permitting based on our experience across the state.

Commercial Sign Installation for Every Business

From storefront signs and channel letters to monument signs, pylon signs, and illuminated displays, we provide professional installation services for businesses of all sizes. Our team ensures every sign is installed safely, securely, and positioned for maximum visibility and long-term performance.

Difficult Installations Are Our Specialty

Not every installation is straightforward. NYC and NJ present unique challenges that require experienced crews and specialized equipment. We handle them all.

High-Rise Installations

Installing signs on buildings 10, 20, even 30+ stories up requires specialized rigging, crane coordination, and safety protocols. Many sign companies don't have the equipment or experience for this work.

Historic Buildings

Landmark and historic buildings have strict rules about facade modifications. You can't just drill into a 100-year-old brownstone the same way you'd mount on modern steel and glass.

Concrete & Masonry

Mounting signs on concrete, brick, stone, or block walls requires different anchoring systems than steel or wood. The wrong approach cracks the surface or creates weak attachment points.

Electrical Integration

Many older buildings have limited electrical capacity or outdated wiring. Running power to a new sign location may require new circuits, conduit runs, and coordination with the building's electrical system.

Multi-Location Rollouts

Multi-Location Rollouts National brands and multi-location businesses need consistent signage across all locations -- same specs, same quality, same timeline. Coordinating 5, 10, or 50 installations requires project management expertise.

Tight Deadlines

Grand openings, lease deadlines, franchise requirements -- sometimes the sign absolutely must be up by a specific date. Delays are not an option.

Our Sign Installation Process

Site Assessment

We evaluate the mounting surface, structural capacity, electrical access, height/access requirements, and any obstacles. This determines the right approach and equipment.

Permits & Prep

If permits are required, we handle the application. We schedule equipment (lifts, cranes) and coordinate timing with building management if needed.

Installation Day

Our licensed crew mounts the sign, makes all electrical connections, tests every component, and ensures proper weatherproofing. We work efficiently to minimize disruption.

Final Inspection

Complete walkthrough with you. We verify alignment, illumination, electrical function, and structural security. Any required DOB inspections are scheduled. Site cleaned up completely.

What Our Clients Say

“”Metro Sign Services handled our permit application from start to finish. They knew exactly what our city required, submitted all the paperwork, and kept the project moving without delays. We didn’t have to chase inspectors or figure out zoning regulations ourselves.”

Benjamin M.

Retail Store Owner

“Getting sign permits approved can be frustrating, but Metro made the process simple. Their team reviewed local codes, prepared the documentation, and secured approval much faster than we expected. Highly recommended for any business installing new signage.”

Jennifer C.

Commercial Property Manager

“Professional, responsive, and extremely knowledgeable. Metro handled everything from drawings and permit applications to city coordination. We were updated throughout the process and our sign was approved without unnecessary complications.”

Sarah M.

Marketing Director

What Bad Installation Actually Costs You

Cutting corners on installation might save money upfront, but it almost always costs more in the long run. Here is what happens when signs are installed wrong.

Structural Failure

Improperly mounted signs can fall, causing property damage, injury, and massive liability. A sign that falls onto a sidewalk in NYC is a nightmare scenario.

Voided Warranties

Most sign manufacturers require professional installation. DIY or unlicensed installation voids the warranty on a sign that may have cost thousands of dollars.

Code
Violations

NYC DOB violations for non-compliant sign installations range from hundreds to thousands in fines. Repeat violations can result in mandatory removal at your expense.

Premature
Wear

Poor weatherproofing and bad electrical connections cause signs to fail years before they should. You end up paying for a repair or replacement that should not have been necessary.

Professional installation costs a fraction of what you will spend fixing a bad one. Do it right the first time.

Frequently Asked Questions

Do I need a permit to install a sign in NYC?

In most cases, yes. NYC DOB requires permits for illuminated signs, projecting signs, and signs above certain size thresholds. Non-illuminated flat signs below a certain square footage may be exempt. We assess your specific situation and handle all permit applications as part of the installation process.

Can you install a sign I purchased from another company?

Absolutely. Many clients order signs online or from out-of-state fabricators and need a licensed local crew to install them. We install signs from any source — just share the specifications and we'll handle the rest. We recommend having us review the sign's specifications before purchase to confirm it's suitable for your location.

How long does sign installation take?

Most single-sign installations (channel letters, light boxes, blade signs) are completed in one day. Monument and pylon signs may require 2-3 days due to foundation work. We provide a specific timeline with every quote and coordinate scheduling to minimize business disruption.

What equipment do you use for elevated installations?

Depending on the height and access requirements, we use boom lifts, bucket trucks, scaffolding, or cranes. Equipment is selected based on the specific site conditions — building height, sidewalk clearance, overhead obstructions, and vehicle access. All equipment costs are included in our installation quotes.

Do you handle the electrical connections?

Yes. All electrical work — wiring, connections, circuit setup, timer installation, and photocell configuration — is performed as part of the installation. Our electrical work meets all NYC and NJ codes. We ensure your sign turns on and off as intended and is properly protected from power surges.

Can you remove an old sign and install a new one?

Yes — this is one of our most common jobs. We remove the old sign, restore the building surface, and install the new sign as a coordinated project. Bundling removal and installation saves time and often costs less than hiring two separate crews.

Questions About Sign Installation?

Our licensed sign installation crew serves NYC and NJ and is ready to answer any questions about your project. Call us directly or send a message — we typically respond within a few hours.

Hours of Operations

Monday – Friday: 8am – 6pm

24/7 emergency service available

Our Services

Sign Fabrication

Need a sign designed and built? Our fabrication team creates custom commercial signs for businesses across NYC and NJ. Pair fabrication with our installation for a seamless, single-vendor experience.

Sign Repair

Have an existing sign that needs fixing? Our repair team handles all commercial sign types with 24-hour emergency response. Flickering lights, storm damage, electrical issues — we fix it all.

Sign Maintenance

Protect your sign investment with scheduled inspections, cleaning, and preventive maintenance. Our plans catch problems before they become expensive emergency repairs and extend your sign’s life.

Need a Sign Installed? Let's Get It Done.

Licensed crew, proper equipment, code-compliant work. Whether it is a single storefront sign or a multi-location rollout, our team delivers professional installation every time.